Jewelry Display Cases
The Four (two Double) Cases are made from 1/2" thick Pine with 1/4" Maple plywood Bcks and were made to hold 8-1/4" Wide x 14-3/4" Long x 1" Thick jJewelry Trays. The trays will be on a slight angle in both the Top and Bottom Sections. There is a Storage area, under the tray, in the Bottom Section. The Top is Secured to the Bottom Section with screws. The units were delivered unfinished per the Customers requiest. Bottom Section is 4-1/4" high and the Top Section is 2-1/2"
Long-time member
A Maker who has been a valued part of this community for several years.
Fast shipper
Customers say that this Maker ships promptly after completing a project.
Great service
This Maker has consistently demonstrated excellence in craftsmanship and customer service.
We have been in business since 1974. We produce Handcrafted Furniture, Cabinetry and Wooden Boxes from Domestic and Exotic wood and as well as material salvaged from Old Buildings. Our goal is to produce a product to the customers requirments and expectations and to deliver it in a timely manner.
All items are Custom made to customers requirements (i.e.: - Size, Wood Species, Interior configuration).
I have also operated a small Custom Remodeling business, (Colonial Building and Remodeling - PA Registration # 006064), since 1974 and perform all kinds of work from fixing a door problem to Constructing and Finishing an entire Addition. Capable of performing Rough and Finish Carpentry, Plumbing, Electrical, Drywall (Installation and Finishing), Painting, Cabinetry Construction and Installation, Tile/Slate Installation, Hardwood and Laminate Floor Installation and Finish Trim Work. Have performed Restoration work on a 105 year old Adirondack Lodge on Lake George, NY. , a 100 yr old house in Valatie NY, and a 250 yr old stone manor house in the Lebanon PA. area. Willing to travel to perform work and install my items.
- M
Mark
For Mark's Guitar display cases4.5The cases were completed ahead of schedule however, some things were changed such as the joint type (different joint used then proposed) and installation of silver latches versus the proposes brass (even though I accepted the silver after all.) The communication was a bit lacking but ended up ok in the end. The value does not meet the cost of the units in my opinion and they should have been $75 per case less and it would have been fine. I did not argue the price and paid in full the agreed to price but I feel I overpaid about $225 total.
All in all the cases are acceptable and will be hung in my living room showcasing my prized guitars!
- GS
George Shikitino
For Custom Pine Door5.0Stephen is an old time craftsman. His work is super. He called me to ensure he knew exactly what I needed and delivered my door is far less time than I thought it would take. I would recommend Stephen to any one.
- JO
Joe Ourada
For Custom doors5.0Stephen did a great job matching our current doors using pictures and measurements that I provided. Couldn't be happier.
- LT
Luke Treadway
For 26" White Ash Half Barrel4.5 - RB
Rhys Bennett
For Maple And Walnut Chess Board4.7Stephen made us a fantastic chess board. He was helpful, professional and friendly. We highly recommend him.
Maker Policies
Discover true craftsmanship each week
A guide to the best items from the best makers and the stories behind them.
