Led Lighted Acrylic Sign
Frontier Technology, Inc. made one round acrylic sign which was edge illuminated with blue LEDs. Other color LEDs are available. The acrylic was clear and 3/8 inch thick. We also use 1/8th and 1/4 inch thick acrylic. The image was supplied by the customer. The acrylic was be laser cut forming a circle approx. 23.75 inches in dia. The acrylic was be laser engraved with the letters, "NSEW" and the center image. Blue LEDs were mounted around the entire perimeter and covered with a black adhesive rubber. The LEDs are spaced approx. every .6 inches. The LEDs and black adhesive were covered with a black plastic edging. The LEDs connect to a female power connector with connection sizes of 5.5mm exterior post and 2.1mm interior post. The LED Lighted Acrylic Sign is intended to be mounted in a wooden frame.
Remi Callens
Frontiernow Engraving and Graphics, LLC
Northampton, PALong-time member
A Maker who has been a valued part of this community for several years.
Fast shipper
Customers say that this Maker ships promptly after completing a project.
Great service
This Maker has consistently demonstrated excellence in craftsmanship and customer service.
We custom laser engrave and laser cut speciality products made from wood, acrylic, mylar, cork, glass, marble, granite, leather, mirrors, and many more materials.
Custom router templates are our specialty.
When we receive an order, we will make a rough draft of what we think it might look like. An email is sent to you for approval or allow you to make any design changes necessary. The project is then completed and shipped to you.
We urge you to be as creative and original as possible.
Maker Policies
Discover true craftsmanship each week
A guide to the best items from the best makers and the stories behind them.
