Fused Glass Wall Sconce - "Observer" - Sold
Decorative wall mounted sconce featuring a fused glass face, supported by a machined aluminum base. Fused glass face of vanilla glass features a whimsical contemporary design with a single eye as a focal point (there's just something about eyes that I love - I have one in nearly every one of my pieces). The backplate (also made by me) is machined aluminum to which a mottled black patina has been applied. One 40W lamp supplies the light source; this fixture is for ambient lighting, and is great for a hallway or foyer. 14"h x 9"w x 4"d One-of-a-kind - available for purchase now.
Long-time member
A Maker who has been a valued part of this community for several years.
Fast shipper
Customers say that this Maker ships promptly after completing a project.
Great service
This Maker has consistently demonstrated excellence in craftsmanship and customer service.
The mainstay of my shop is fused glass creations…. this can be a stand alone piece of glass, a mixed media composition (sculptural or wall-hung), or a functional piece of work (light fixtures, plates/trays/bowls,inserts for doors or cabinets, etc).
I most enjoy making custom pieces for folks… Because I am intuitive, after a short conversation I am able to "get that person" and design a piece that is "theirs".
While many glass artists began with stained glass and later transitioned to fused work, I have 20 years experience working in fused glass. I prefer fused glass for the following reasons:
- it is STRONGER than stained glass. Art glass is 1/8" thick; a stained glass pieces consists of a lot of 1/8" pieces of glass soldered together… which means that it is thin and with all of those joints, it has the potential to come apart.
Fused glass, on the other hand, is a SINGLE piece of glass; while an individual composition is comprised of as many (or more) pieces than a stained glass piece, everything is assembled in the kiln and fired into a single, final piece. Additionally, fused glass can be made as thick as you want…so, depending on the application, multiple layers of glass can be fused together (think "glass sink"). Really thick pieces are more expensive to produce because the firing process (bringing the heat up, ramping it down, and annealing) takes far longer - it is not uncommon for a firing process to take 20+ hours with a thick/large piece of glass.
Stained glass pieces have distracting solder lines which can detract from the overall design composition - fused glass has none of these distractions!
With fused glass, you have a larger "palette" to work from. You can "make your own glass" by pre-firing different glass together (to make polka dot glass, for example) and then cut it up for your design.. glass can be fired over and over in most instances.
All of my designs are from my own original drawings; if you have something specific in mind, I would be happy to work with you to create a working drawing for a project.
Technical excellence is evident throughout my pieces; I am a perfectionist when it comes to my work, and am willing to do "whatever it takes" to have a design materialize into the physical.
Maker Policies
Discover true craftsmanship each week
A guide to the best items from the best makers and the stories behind them.
