"Taste The Wine" Led End Table With 1,300 Corks And Customizable Wine Bottle. 1
"Taste The Wine" Led End Table With 1,300 Corks And Customizable Wine Bottle. 2
"Taste The Wine" Led End Table With 1,300 Corks And Customizable Wine Bottle. 3
"Taste The Wine" Led End Table With 1,300 Corks And Customizable Wine Bottle. 4

"Taste The Wine" Led End Table With 1,300 Corks And Customizable Wine Bottle.

$1,500

This is an original design that has been completely hand built from scratch. For the ultimate wine lover…the ultimate collector of fine arts…someone who wants to create a warm and inviting environment in their home or office, this work of art is for you. Table comes complete with a 1/4" clear glass top, more than 1,330 various wine corks, two 120v LED lights, 4 ft. of electrical cord with inline on/off switch, two wine glasses and a customized bottle of wine. Here is the breakdown of each. The table was built to my specification by a craftsman local to Wilmington, NC. The table is Red Oak and is stained with a mixture of American Colonial and Red Mahogany. It stands approximately 25" tall, 27 1/4" length, and 27 1/4" width. Weighs roughly 90 pounds. A carefully planned and executed art piece is underneath the glass. More than 1,300 corks were carefully attached to the walls and base. Many of the corks are attached atop of one another creating "towers". To build a tower, a number of corks were drilled, a thin steel wire connected them, and then they were glued and clamped to ensure complete durability. There are two 120 v LED lights inside. LED lights have an average lifespan of 15 years when used for 8 hours per day. I chose to use LED lights for their longevity, energy conservation, and because they generate very little heat. Although the bulbs are expected to last for a long while, this table has also been built to ease the changing of bulbs. There are two housing units over the electrical connections. By simply removing the glass, one can pick up ONE colored cork, and remove the housing unit. A bulb takes roughly 3 minutes or less to change. There are two wine glasses in this sculpture as well. They have the appearance of containing red wine in them. This is a completely cured dyed poly mixture. In other words, they are solid and will not spill. There is also a customized wine bottle inside. If you are interested in this table, you and I will discuss the design, text, color, optional photos and appearance of your wine label. For any occasion. Once the design and execution of the customized label has been approved, I will attach it to the bottle and send a last picture to you before shipping. All of my tables come with a black metal name plate bearing the Shadowtables logo, and the name of the table. This table is called "Taste The Wine". If you would like another name-plate attached that is personalized, I can do that too. This table will also come with simple instructions on how to care for your table, how to change bulbs, special offers, and a Certificate of Authenticity.

Send request to maker
Eric Hine

Eric Hine

Shadowtables

Wilmington, NC
Member since: 2014
  • Long-time member

    A Maker who has been a valued part of this community for several years.

  • Fast shipper

    Customers say that this Maker ships promptly after completing a project.

  • Great service

    This Maker has consistently demonstrated excellence in craftsmanship and customer service.

When I was a kid, I had a train set in my bedroom. It was a small HO scale train, complete with one farm, one house, a fruit stand, and some miscellaneous people and other structures. Like most kids at that age, my favorite part was running the rain at full speed through a handful of hapless pedestrians! Sick as that may have been, I always said that when I was older, I would have an entire room in my home dedicated to my train sets. Of course, as we get older, such things are not really affordable, never mind practical. But, as an adult, I still wanted to fulfill the dream of my thirteen year old self.

It was around 2010 when I really thought about that train set again. After much thought, I decided I would take a piece of my existing furniture, cut a hole out of the top, install four walls and a bottom, and cover it with glass. And inside, I would fulfill (at least partially) my childhood dream. However, I was not about to cut into my dining room table. So instead, I went to a yard sale, and bought an old coffee table. I found an out-of-work construction worker and had him build me the wooden sides and bottom. For my first project, I was going to experiment and build a small replica of the world famous Pebble Beach Golf Course. And thus, Shadowtables was born.

I have been high-fived and praised repeatedly for my most ambitious move just last year. I left my full time corporate job to pursue my business full time. Folks tell me it was very brave, but I think there is a fine line between courage and stupidity. The jury is still deliberating as to which side of that line I am on.

The goal of Shadowtables is to provide a free consultation with anybody who has found my work to be interesting, and unique. I want to learn from each person everything that I can about them. Maybe it is family, religion, film, television, music, science fiction, art, sports, pets, or something else. I want to brainstorm with them and discuss ideas and begin to design (in my head at least) what table theme would best suit them. Think of it like a tattoo. While some of us have a few drinks and wake up the next morning with ink, most of us think the process through very carefully, ensuring that what we decide on will not be regretted years later. However, unlike a tattoo, you don’t have to come to me with your preconceived idea. I will help you discover what it is that you might want. An example of this, is when my friend and I recently met to discuss his table. I learned through him that he was inspired every morning by large artistic Chinese symbols that adorned his bedroom walls. His favorite symbol, is the symbol of “Strength”. I also learned that he loved my table, “Infinity”. After some brainstorming, I came back to him with my idea, which he loves, and is currently under construction. “Smashed” is going to be a table with an optical illusion. A mirror on the bottom, a one-way mirror on the top, with lights in the middle. This will give the illusion of a bottomless table. However, I am also using a CNC router to cut the Chinese symbol of “Strength” out of wood, and will place that inside the table with lights. The top mirror has been shattered, and each piece will be carefully assembled. The final product will have lights, and the symbol of “Strength” actually breaking through the mirror above it! I am very excited about sharing this table once it is complete.

EVERY table that is custom-made, is completely custom built. The size, style, dimensions, and type of wood will be up to you. The color, whether it is Ebony Stain or a distressed white and aquamarine, will be up to you. It is not yours unless it is exactly what you want it to be.

Maker MarketPlace Background

Maker Policies

Discover true craftsmanship each week

A guide to the best items from the best makers and the stories behind them.